Stickers & Labels

Surge Protection Labels

Surge Protection Labels for Consumer Units

from £30.52

As low as 4.1p each 5,040 for £204.32, Saver

Surge protection labels for electricians fitting surge protection devices in consumer units and distribution boards. Record the date fitted and installer, and tell the customer where to look for the status indicator. Two sizes, in packs starting at 48.

Size

Material

Quantity

Turnaround

…Working out your price

Price is final, no surprises at checkout. UK delivery £7.95, free over £100. Scottish Highlands +£10; islands and NI quoted.

Price per itemAs low as 4.1p each at 5,040

Quantity	Total	Each
48	£30.52	63.6p
480	£55.26	11.5p
2,016	£111.52	5.5p
5,040	£204.32	as low as4.1p

For 96 × 45 mm, Gloss paper (indoor), Saver. Tap a row to choose that quantity.

Free online designer

Design your label online

Add your company name, phone and logo to a ready-made layout, move things around and see exactly how it will print. What you see is what we print. No design fee.

Your details on the labels

Company namePhone numberRegistration / scheme number (optional, printed as text)Your logo (optional)

Write-on lines (fill in by hand) Pre-print the same details on every label

Extra wording, numbering or details to pre-print (optional)

We never print scheme or trade-body logos (Gas Safe Register, NICEIC, NAPIT and so on); registration numbers are printed as plain text. Check every detail before you order: we print what you enter.

Artwork

Add my details to this label designFree: we set your company name, phone, number and logo on this template, and you see it in the designer.FreePrint only: I will upload print-ready artworkWe print your file exactly as supplied and do not fix or change it. Our automatic check stops files that are too low resolution or the wrong size.FreeFile check: a person checks my file before printingWe check size, bleed, resolution, fonts and text, and email you if anything is wrong. Your order is held until the right file arrives.£4.99Design it for me from my briefFull layout from your brief, logo and photos. 1 design + 2 rounds of changes.£35.00Redraw / vectorise my logo from a low-res fileWe recreate your logo as a clean vector file you keep.£30.00Design a new logo for meA new logo from your brief, with changes, supplied as vector files.£50.00Same artwork as another item in my basketNo extra fee: one design fee covers every item with the same design.No fee

Notes or brief for our designer (optional)Upload files (artwork, logo, photos or a sketch; up to 3 files, 25 MB each)

Artwork fees are fixed, shown as their own line in your basket, and cover the whole quantity of this item. You can also upload later: we email you after you order.

Saver: made and dispatched in 7 working days. Faster speeds, where offered, are in the options above.

Secure card paymentPaid by card through Stripe
Printed to order in the UKEvery sticker made after you order
Every upload checkedAutomatically, before it prints
£7.95 delivery per orderFree when your stickers total £100 or more

Surge Protection Labels printed with a company name and phone number (surge protection label printing)

What you get

Surge protection labels are write-on labels fixed to a consumer unit or distribution board to show a surge protection device is fitted, with lines for date, device and installer. Sizes are 76 x 51mm and a slim 96 x 45mm, in paper or waterproof polypropylene. Packs of 48 to 10,000 are produced in 7 working days at Saver speed.

Printed in full colour and made to order in the UK
Every upload is checked automatically; add File check (£4.99) and a person checks it too
Design it free online, or upload your own PDF
UK mainland delivery £7.95 per order, free when your goods total £100 or more

Overview

Surge protection labels tell a homeowner or facilities manager that a surge protection device is fitted and how to check it. Electricians stick one on the consumer unit cover after fitting an SPD, write in the date, and add a line in their own words about what the indicator window should show.

Who fits surge protection labels

Domestic and commercial electricians, consumer unit replacement specialists and solar or EV installers who add surge protection as part of a job.

Where the SPD label goes

On the consumer unit lid or door close to the device, or on the inside of the door on the circuit chart side. Keep the label off vents and the device itself.

Surge protection label sizes and materials

A compact label for the board lid, or a slim strip that sits above a row of devices.

Option	What it means	Good for
76mm x 51mm	Compact, several lines	Consumer unit doors
96mm x 45mm	Long and slim	Above a DIN rail, board covers
Matt paper	Indoor, easy to write on	Homes and offices
Waterproof polypropylene	Matt laminated, indoor and outdoor	Garages, outbuildings, sub-boards
Gloss paper	Shiny, indoor	Fully printed notices

What to print on an SPD label

A heading, a short note on checking the status indicator, then lines for date fitted, device and installer. Your company name, phone and scheme or registration number print as text.

SPD label quantities

Packs run from 48 to 10,000; polypropylene SPD labels start at 500. A firm fitting surge protection on most board changes saves per label with a bigger order.

Ordering surge protection labels

Your print-ready SPD artwork goes in with the order, or select design help at checkout. Surge labels are produced in 7 working days at Saver speed.

Specs

Materials, sizes and finishing.

Sizes	76 x 51 mm, 96 x 45 mm
Materials	Gloss paper (indoor), matt paper (indoor, easy to write on), waterproof polypropylene (matt laminated, indoor and outdoor)
Packs	48 to 10,000 labels; polypropylene from 500
Printed details	Label wording, write-on lines, company name, phone, scheme or registration number (as text), optional logo
Supplied	On sheets, kiss cut, permanent adhesive
Saver production	7 working days
SKU	FP-LAB-011
Price	Final price shown in the configurator. No surprises at checkout.
Delivery	UK mainland £7.95 per order, free over £100. Scottish Highlands +£10; islands and NI quoted.
Artwork check	Automatic file check on uploaded artwork (resolution, size and bleed). Designs made online: you see exactly what you will get.

Artwork templates

Free templates in every size, with the bleed, cut line and safe area marked, plus an artwork guide.

3 mm bleedKeep text 3 mm inside the cut line300 dpiCMYK PDFFonts embedded or outlined

76mm x 51mm76 × 51 mm finished · 82 × 57 mm with bleed

PDF template PNG Artwork guide

96mm x 45mm96 × 45 mm finished · 102 × 51 mm with bleed

PDF template PNG Artwork guide

How to use a template: open the PDF in Illustrator, InDesign, Affinity or Canva (or use the PNG), put your design on top, keep text inside the blue line and run backgrounds to the outside edge, then delete the guides and save a PDF. No design software? Choose Design it for me when you order and our designers set it up and send you a proof.

Questions

Quick answers about surge protection labels for consumer units.

Where does a surge protection label go?

On the consumer unit door or lid near the SPD, clear of vents and the device itself.

Can I explain the status indicator on the label?

Yes, you write the wording, so add a short line about what the indicator should show.

Can my scheme or registration number be printed?

Yes, as text beside your company name and phone.

Which size fits above a row of breakers?

The 96mm x 45mm strip is long and slim, so it sits neatly above a DIN rail.

What is the minimum order of SPD labels?

48 on paper; polypropylene starts at 500.

How long do surge protection labels take?

Seven working days at Saver speed. Quicker speeds may be offered on the product page.

Asked by buyers

No questions have been asked about this product yet.

Buying guides

All guides

IdeasPersonalised Christmas sticker ideas for gifts, cards and parcelsPersonalised stickers for Christmas do the jobs a pen and a roll of tape do badly:…

No reviews yet.